View our air trailer tongue mount couplers or pintle ring installation instructions, video and air pressure guide.
Download Installation Manual
Shocker Air Trailer Tongue Hitch Installation Manual
Maximum Weights for Tongue Mount Air Shocker: 20,0000 towing capacity
Safety Notice: The Shocker Hitch is a heavy duty unit that in most cases exceeds factory receiver hitch weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight recommendations of the receiver hitch that is mounted on your tow vehicle.
When used properly these products will make noticeable improvements in your trailer towing quality. Giving both truck and trailer a smoother ride with less trailer fatigue and breakage.
Shocker Trailer Tongue Coupler / Pintle Hitch Installation:
Vertical Channel & Square Plate adaptor styles only: Replace existing ball coupler on the tongue of trailer with the Shocker Hitch Tongue Mount Hitch. Verify or lengthen safety chains and wiring connections to ensure proper clearance when turning corners.
To Set Air
Load trailer the way it will be towed. Inflate airbag on Shocker air trailer tongue coupler or pintle ring.
CAUTION: Keep hands and clothing away from moving parts of hitch to avoid pinching and injury.
As air pressure increases, the unit will rotate lifting the hitch and trailer tongue. Install air until green bushing has 1/4″ clearance from the red frame. Always inflate air bag to set the Shocker Hitch, never deflate air bag to set Shocker Hitch, unsatisfactory results may occur.
Air Trailer Tongue Mount Air Pressure Video
When using Equalizer/ Weight Distribution Bars:
Follow directions above, then hook up equalizer bars, and continue inflating air bag until 1/4″ clearance on bump stops is achieved.
Note: When towing heavy trailers or trailers with high wind resistance it may be necessary to increase air pressure in the Shocker.
Usage: Under normal circumstances tongue weight should be at least 10 percent of total towing weight. NOTE: IT IS HIGHLY RECOMMENDED THAT THE HITCH BALL BE GREASED TO REDUCE WEAR AND IMPROVE SHOCKER ACTION.
Maximum Pressure: Do not exceed 100 psi in the air bag, as it may damage the air bag.
Shocker Air Trailer Tongue Videos
We’re here to help. Contact Us
Installation Issues
We want you to have the best possible towing experience with your product and proper installation is important. If you need help, we are here for you. Just give us a call at 701-707-2666 or use our contact us form. You can also look up the items product page on our website and view the installation tab. Most products on our website have a set-up guide and installation video.
Ordering Options
-
Product on saleShocker HD 20K Air Trailer Tongue Mount with Wallace 2-5/16″ Ball CouplerFrom: $674.99$859.98
-
Product on saleShocker HD 25K Air Trailer Tongue Mount with Wallace 2-5/16″ Ball CouplerFrom: $764.98$939.98
-
Product on saleShocker 12K Air Trailer Tongue Mount with Wallace 2″ Ball CouplerFrom: $611.99$729.99
-
Product on saleShocker HD Air Trailer Tongue Mount – No CouplerFrom: $602.99$729.99
-
Product on saleWallace HD Trailer Coupler 2-5/16″ Ball – Channel Mount – 25,000 lbsFrom: $145.79$189.99
-
Product on saleShocker Air Trailer Tongue Mount – No CouplerFrom: $539.99$669.99
-
Product on saleShocker 14K Air Trailer Tongue Mount with Wallace 2-5/16″ Ball CouplerFrom: $602.09$759.99
-
Product on saleWallace Auto Locking Trailer Coupler 2-5/16″ Ball – Channel Mount – 20,000 lbsFrom: $101.19$119.99
-
Product on saleWallace Auto Locking Trailer Coupler 2″ Ball – Channel Mount – 12,000 lbsFrom: $70.20$95.00