
Trail Force Air Hitch & Chrome Combo Ball Installed on 2" Receiver
Super Fast Express Checkout
PRODUCT DESCRIPTION
Guides open in a new tab so you can keep your hitch selections.
The patent-pending Trail Force® Air Receiver Hitch is designed for receiver locations inside the bumper, commonly found on SUVs and some service-body and flatbed trucks. It is available for 2-inch receiver hitches with over 20 attachment choices. Its heavy-duty frame has 10 adjustment holes for a range of drop and rise settings, depending on the attachment selected. Check receiver position, size and available clearance before choosing your hitch.
Choose from over 20 Shocker receiver hitch ball mount attachments options, including combo ball, drop mount, raised, clevis, drawbar, pintle hitch, pintle with a ball, as well as mounts with sway bar mounting tab options. Featuring an impact resistant matte black textured powder coat finish. 14,000 lbs GTW tow rating & 1,400 lbs of tongue weight capacity.
Pintle & Ball Towing Ratings: Complete SH-334 attachment ratings: pintle mode, 16,000 lb GTW; 2" ball mode (SH-334-2), 12,000 lb GTW; 2-5/16" ball mode (SH-334-25), 16,000 lb GTW. Maximum attachment TW is 3,000 lb in each mode. Follow the selected hitch base rating; other attachment options have their own limits.
Safety Notice: Towing capacity is limited by the lowest-rated component. Never exceed the lowest applicable gross trailer weight (GTW) or tongue-weight (TW) rating of the vehicle, receiver, hitch base, attachment, ball, coupler or trailer. Evaluate GTW and TW separately. The proper ball must be installed before towing, including in pintle mode. SH-334 without a ball is a replacement part only.
Manufactured by Shocker Hitch® USA in Jamestown, ND.
Note: This SUV, inside the bumper mount, hitch will not work with vans, CUVs & 2WD pickups as the frame is too long when mounting to a receiver hitch under the bumper. However, it will work on 2500, 3500 & taller than stock pickups
The Trail Force® hitch routes towing forces through its air spring and pivoting assembly, cushioning the connection between your tow vehicle and trailer. As tongue loads change over uneven pavement, the air spring absorbs movement while the dual urethane bump cushions provide additional cushioning on rough roads. Adjusting air pressure for your loaded trailer helps the system work properly as your towing load changes.
California Residents: Prop 65 Warning
QUESTIONS AND ANSWERS OF THE CUSTOMERS
The Trail Force will work for the 2024 Ford Expedition with independent rear suspension!
Asked by Robert Howard · 2026-01-03 · Answered by Logan Henke (CS / Sales)
Hi Aaron, Trailforce is mainly designed to work with 1/2 SUV's where the reciever hitch is mounted in the bumper. If yours is below the bumper on your Ram 1500, I would recommend Shocker 14K. If you think you might tow with 3/4 ton or more, a Shocker 20K might be appropriate.
Asked by Aaron Holloway · 2026-03-08 · Answered by Jim Gerling (Outside Sales)
To verify fitment, please call us at **701-707-2666** and our team can check it against your Cybertruck's receiver setup. 👍
Asked by Oscar · 2026-08-31 · Answered by Sam
CUSTOMER REVIEWS
There are no reviews yet.