• This is a refurbished or used like new hitch that was returned to factory for whatever reason. It may have dings and nicks in finish. Otherwise it is like a almost new hitch & works great.
• Smoother Safer Towing with Built-in Air Ride System: Air ride towing technology with a built-in air spring to cushion the ride & absorb the road shock. Add instant air ride to your pickup & trailer. Helps eliminate tugs, thumps, jerks & bumps felt when towing on rough roads or concrete highways. Get a way smoother towing experience. No more jarring every time you cross a section divider. Absorbs road shock, creates a smooth ride & naturally reduces the tendency to trailer sway. Dual urethane bump cushions offer maximum performance.
• Heavy Duty 5/16" Thick Side Plates with 8 Adjustment Holes: 2" of rise to 8-1/2" of drop. Depends on mount chosen. See the drop & rise guide below. Adjustment for combo-ball mount is 0" to 4-1/2" drop. Perfect for heavy-duty trailer towing with a bumper hitch. Thick HD carbon steel side plates & top plate, heavy-duty air spring & dual bump cushions.
• Saves Money & Reduces Damage to Trailer & Cargo: By reducing trailer breakage on both the trailer & contents. The Shocker hitch absorbs the damaging forces experienced with a typical hard connection. This greatly reduces the chances of breaking welds & doing other long-term damage to your equipment & valuable cargo.
• Improves Safety & Provides Comfort: By giving you improved control of your tow vehicle and trailer. The air ride receiver hitch system allows for better control of your pickup and the trailer it is towing. It’s easier on you, your passengers, animals, cargo, and equipment.
• 14,000 lbs GTW Capacity: 14,000 lbs towing capacity & 1,400 lbs tongue weight. Fine-tune by adjusting the air. (can vary by mount)
• Optimized Your Towing – It’s Easily Adjustable for Tow Weight: Fine tune for your towing weight. Watch Air Pressure Setup Video for heavier loads and reduce air pressure for lighter loads.
• Pivoting Design: Filters the rock shock through the urethane cushions with the greaseable 1" diameter 1045 carbon steel pivot bolt.
• 20+ Ball Mount Options: Huge selection of ball mount attachments available from combo ball, drop, raised, drawbar, clevis pin, clevis, sway bar tab options, pintle hook, pintle & ball attachments, and more. The combo adjustable multi-ball mount has 2" & 2 5/16" hitch ball.
• Adds Life To Your Vehicle & Trailer: By reducing wear & tear on driveline & frame. Treat yourself, your equipment & your passengers to a much smoother ride. You’ll never go back to the days of continual bumps, jerks, and vibrations.
• Complete Air Receiver Hitch Kit includes: Shocker air ride receiver hitch with built-in air ride system & dual bump cushions, ball mount attachment you choose and three d-handle 5/8" diameter pins with clips, 2 for the attachment and 1 for the receiver.
• Simple Effective Design: uses a rocker arm pivot design which produces a down a& back motion, much different than other air hitches on the market. Our design eliminates the need for slides, parallel linkages, rollers, shock absorbers, or multiple air ride systems common to other air hitches.
• Saves Fuel: By reducing the jerks, tugs, and sways, customers report getting 1 or more miles per gallon improvement.
• Great for Pickups & SUVs with Receiver Under Bumper: Fits Great for Full Size Pickup Trucks & Vans, Midsize Pickups & Select SUVS (with receiver under bumper). Popular installs include GMC Sierra, Chevy Silverado, Chevy Colorado, GMC Canyon, Dodge Ram, Ford Ranger, Maverick F150, F250, F350, F450, F550 Superduty, Toyota Tundra, Tacoma, Nissan Titan, Frontier, Honda Ridgeline & Hyundai Santa Cruz.
• Safety Red Powder Coat Finish: Impact-Resistant Premium Powder-Coat Finish on Base Frame.
• 2 Hole Receiver Shank: Available for 2" & 2 1/2" receiver hitch tubes featuring 2 hitch pin holes for length adjustability. If you need a 3" receiver, see our HD series air receiver hitches.
• Air Ride Receiver Hitch Mount Drop & Rise + Tow Rating Guide (8 Hole Frame) – Combo Ball: 0" Rise to 4.5" Drop | 2-5/16" ball rated at 20,000 lbs & 2" ball rated at 10,000 lbs.– Drop Ball: 4.5" to 8.5" Drop | 2-5/16" ball rated at 20,000 lbs & 2" ball rated at 10,000 lbs.

  – Raised Ball: 2" Rise to 2" Drop | 2-5/16" ball rated at 20,000 lbs & 2" ball rated at 10,000 lbs.

  – Bolt on Pintle Hook: 2.5" Rise to 6.5" Drop | 10-Ton 20,000 lbs.

  – Channel Style Pintle Hook: 3" to 7" Drop | 10-Ton 20,000 lbs.

  – Bolt on Pintle & Ball: 2.5" Rise to 6.5" Drop | 8-Ton 16,000 lbs. (2" Ball is 10,000 lbs).

  – Channel Style Pintle & Ball: 3" to 7" Drop | SH-334 complete attachment: pintle mode 16,000 lb GTW; 2" ball mode 12,000 lb GTW; 2-5/16" ball mode 16,000 lb GTW; 3,000 lb TW in each mode. Proper ball required, including in pintle mode. Lower-rated hitch base or other components limit the setup.

  – Drawbar: 0" Rise to 4.5" Drop | 20,000 lbs.

  – Clevis Mount: 3.5" Drop to 7.5" Drop | 20,000 lbs.

  – Sway Bar Mounts: Same Rating as Like Type Mount Listing Above.

• NOTE: This product will NOT work with a weight-distribution hitch system, if you have a w-d hitch, check out our Shocker Hitch Air Equalizer for WD Hitches.
• What Size Receiver Hitch Do I Need? Not sure if you have a 2", 2.5" or 3" receiver tube?  Measure inside to inside. Check out our guide on How to measure receiver your hitch tube size.
• How Much Drop or Rise Do I Need? Check out our guide to find out how much drop or rise you need.
• Safety Notice: Towing capacity is limited by the lowest-rated component. Never exceed the lowest applicable gross trailer weight (GTW) or tongue-weight (TW) rating of the vehicle, receiver, hitch base, attachment, ball, coupler or trailer. Evaluate GTW and TW separately. The proper ball must be installed before towing, including in pintle mode. SH-334 without a ball is a replacement part only.

This is a refurbished or used like new hitch that was returned to factory for whatever reason. It may have dings and nicks in finish. Otherwise it is like a almost brand new hitch & works great.

Smoother towing every mile. Instant air ride for your pickup & trailer. Build your own Shocker 14K Air Hitch® by selecting your receiver hitch size and the adjustable ball mount that suits your towing needs. Choose the air ride receiver hitch base frame with or without a ball mount attachment.

The built-in airbag absorbs road shock and cushions your ride, creating a smoother towing experience for your pickup, trailer, and contents. This miniature air suspension system sits between your truck and trailer, filtering the bangs, bumps, jerks, and tugs normally experienced with a hard hitch connection. Dual bump cushions provide additional cushioning on dirt and gravel roads and concrete highways. There is no reason to beat yourself or your equipment up with a hard connection between your trailer and receiver hitch.

Fine-tune the air pressure for your trailer’s weight to get the best ride and load control. The air ride system sits under the receiver tube, with 10½ inches between the mounting pin and ball center.

Choose from 20+ Shocker receiver hitch ball mount attachments, including combo ball, drop mount, raised mount, sway bar mounting tab options, clevis pin, drawbar, pintle hook, pintle with ball and more.

The Shocker Air Hitch base frame includes everything except the ball mount attachment. The 14K Air Receiver Hitch has a 14,000 lbs towing capacity and 1,400 lbs tongue weight capacity.

Installation is simple: slide the hitch into a standard receiver tube. Designed for pickup trucks, vans, select SUVs, motorhomes, and RVs with the receiver tube mounted underneath the bumper.

Manufactured by Shocker Hitch® USA in Jamestown, ND.

California Residents: Prop 65 Warning