Shocker Replacement Bumper Hitch Shank

Rated 5.00 out of 5 based on 4 customer ratings

$89.99$422.99$109.99$499.99

Money IconExtra 10% OFF, hurry limited time offer.
Free Ground Shipping*
Usually Ships on or Before Mon 07/22/24
Usually Ships on or Before Mon 07/22/24
Usually Ships on or Before Mon 07/22/24
Usually Ships on or Before Mon 07/22/24
Usually Ships on or Before Mon 07/22/24
Usually Ships on or Before Mon 07/22/24
Usually Ships on or Before Mon 07/22/24
Usually Ships on or Before Mon 07/22/24
Clear
OR

-

  • Install arrow

    Install

    Whether if you are upgrading the size of your shank or just replacing the old one. Our easy Step-by-step instructions will make replacing the shank simple.

    Shocker Replacement Shank Installation Instructions

  • Q & A (5) arrow

    Questions and answers of the customers

      Does this fit an 04 navigator
    1. 0 votes
      Q Does this fit an 04 navigator
      A

      These shanks will work on a navigator as long as you choose the correct shank size. However, it does depend on which hitch you are using to know if it will be compatible with your SUV. Our air bag hitches generally do not work on SUV's due to how the receiver is mounted into the bumper. 

    2. What is the distance between hitch pin holes?
    3. 0 votes
      Q What is the distance between hitch pin holes?
      A

      Good morning TK, the distance between each hole is one inch. Thank you for choosing Shocker Hitch.

    4. Can a 2" shank on a 12,000 lb bumper hitch, be replaced with a 2 1/2" shank for a dually
    5. 0 votes
      Q Can a 2" shank on a 12,000 lb bumper hitch, be replaced with a 2 1/2" shank for a dually
      A

      Yes, you can replace the shank with any size needed. These replacement shanks will fit any Shocker HD or Standard Air Receiver as well as the Impact or XRC cushion hitch. You can also use a reducer sleeve on the 2-1/2" receiver down to a 2" if you would like to go that route. Our hitches do work with sleeves. 

    6. Can I replace my 2.5” shank with a 2” on the hd model. 16,000lbs.
    7. 0 votes
      Q Can I replace my 2.5” shank with a 2” on the hd model. 16,000lbs.
      A

      Yes, you can replace your 2.5" shank with a 2" shank. These shanks will work with any  Shocker air receiver hitch, Shocker HD air hitch, Shocker Impact & XRC cushion hitches.

    8. What is the bolt spacing from the pivot to the holes where it pins to vehicle?
    9. 0 votes
      Q What is the bolt spacing from the pivot to the holes where it pins to vehicle?
      A The distance from the furthest pin hole to the mount is 7 1/2".