• Weld-on Trailer Tongue 50° A-frame Vertical Channel Style Adapter: Designed to convert your trailer A-frame to one that accepts vertical channel bolt-on ball couplers or pintle rings.
• Vertical Channel Has 6 Adjustment Holes that are 5/8″ in Diameter: Actual vertical channel is 3.7″ OD / 2.9″ ID  x 12″ Tall w/ 2″ on-center bolt pattern. Channel is HD 3/8″ thick steel.
• Converts a Typical 50-degree Trailer Tongue Into a Vertical Channel: The six-bolt hole pattern works great with typical vertical channel bolt-on trailer couplers or pintle rings. The outer front is 4″ wide, and the outer rear is 11″ wide. From front to back it measures 7-1/2″.
• High Strength ASTM A572 Grade 50 Steel: Made in the USA with Premium ASTM A572 Grade 50 Steel.
• Weight Rating Guide: If you are using 2 bolts to attach the coupler, then it’s 14,000 lbs GTW; if using 4 bolts, then 20,000 lbs GTW. This also assumes this kit is properly professionally welded onto the front of a trailer and the coupler or pintle ring you are using can handle those respective capacities.
• Commonly Used with Bolt-On Channel Mount Trailer Ball Couplers: Including Channel Mount Demco EZ Latch Couplers, Channel Wallace Couplers, Channel Mount Pintle Rings & Shocker Air Tongue Mount Hitches & more.
• Can Be Bolted on to Aluminum Trailer A-Frames: The completed welded vertical channel assembly can also be bolted onto trailers with aluminum A-frames. Drilling required. We also offer a bolt-on HD Vertical Channel Tongue Adaptor for Aluminum Trailers.
• Works with Shocker Trailer Tongue Mounts with Vertical Channels: Shocker Air Coupler Trailer Tongue Mount  & Shocker Pintle Ring Trailer Tongue Mount

Towing capacity is limited by lowest rated component. It also requires professional welding onto the trailer for the weight rating to be applicable.

The Trailer Tongue Vertical Channel mount adapter for your trailer A-frame is a weld-on adapter that converts a typical horizontal trailer tongue to accept a vertical channel-type bolt-on ball coupler or pintle ring. This allows you to adjust the height of the coupler on the front of your trailer. This weld-on vertical channel mount has 6 adjustment holes.  The six-bolt hole pattern works great with typical vertical channel bolt-on trailer couplers or pintle rings. Available completely welded or just the components. Perfect for modifying a trailer or when building a custom trailer.  The outer front is 4″ wide; the outer rear is 11.75″ wide. From front to back, it measures 7-1/2″. Actual vertical channel is 3.7″ OD x 2.9″ ID x 12″ Tall w/ 2″ on-center bolt pattern. This is a 50° A-frame 6-hole vertical channel tongue kit, designed to be welded onto a trailer a-frame.

Weight Rating: If you are using 2 bolts to attach the trailer coupler, then it’s 14,000 lbs; if using 4 bolts, then 20,000 lbs. That also assumes this kit is properly and professionally welded onto the trailer, and the coupler or pintle ring you are using can handle those respective capacities.

California Resident: Prop 65 Warning