• • This is a used like new ball mount attachment that was returned to the factory for whatever reason. It may have dings and nicks in the finish. Otherwise, it is like a “almost new” mount.
  • Refurbished Ball Mount Attachments for Shocker Bumper Receiver Hitches: Made for Shocker Brand Bumper Hitches.
  • Designed to Fit Shocker Receiver Hitches: Works with Shocker Air, Streamline & HD series bumper hitches & Shocker XR series hitches & Impact series cushion hitches. Fits 3-3/4″ Shocker Bumper Hitch Channel.
  • Ball Mount Width is 3/5/8″ ID to fit 3-3/4/” ID Channel: 3-5/8″ wide OD to fit a 3-3/4″ hitch ID channel with a 3″ on center hole pattern for 5/8″ pin for Shocker bumper hitches.
  • Adjustable Heights Vary by Mount Selected: Rise or drop heights depend on the hitch the ball mount attachment is mounted to. See chart below for drop/rise lengths by hitch.
  • Features 2 Pin Design for Superior Strength: Shocker ball mounts are designed with a 2 pin hole design for adjustability and security.
  • Chrome Trailer Ball Options: Choose between a 2″ ball, 2-5/16″ ball, or a combo 2″ & 2-5/16″ ball
  • Farm Equipment Attachments: Choose between clevis, drawbar, cushioned drawbar, pintle hook mount, or combo pintle ball mount.
  • Sway Control Mounts: Choose between a raised, drop, or combo ball mount with welded sway tabs to attach friction sway arms.
  • Powder Coat Finish: All Mounts feature an Impact Resistant Black Textured Powder Coat Finish. Combo & Cushion Drawbar with Silver finish. Bolt on balls are Chromed steel.
  • Safety Notice: Towing capacity is limited by the lowest-rated component. Never exceed the lowest applicable gross trailer weight (GTW) or tongue-weight (TW) rating of the vehicle, receiver, hitch base, attachment, ball, coupler or trailer. Evaluate GTW and TW separately.

– Drop Ball: 4.5″ to 8.5″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs.

– Raised Ball: 2″ Rise to 2″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs.

– Bolt on Pintle Hook: 2.5″ Rise to 6.5″ Drop | 10-Ton 20,000 lbs.

– Channel Style Pintle Hook: 3″ to 7″ Drop | 10-Ton 20,000 lbs.

– Bolt on Pintle & Ball: 2.5″ Rise to 6.5″ Drop | 8-Ton 16,000 lbs. (2″ Ball is 10,000 lbs).

– Channel Style Pintle & Ball: 3″ to 7″ Drop | SH-334 complete attachment: pintle mode 16,000 lb GTW; 2″ ball mode 12,000 lb GTW; 2-5/16″ ball mode 16,000 lb GTW; 3,000 lb TW in each mode. Proper ball required, including in pintle mode. Lower-rated hitch base or other components limit the setup.

– Drawbar: 0″ Rise to 4.5″ Drop | 20,000 lbs.

– Clevis Mount: 3.5″ Drop to 7.5″ Drop | 20,000 lbs.

– Sway Bar Mounts: Same Rating as Like Type Mount Listing Above.

• Impact Cushion Hitch Mount Drop & Rise + Rating Guide:– Combo Ball: 4″ Rise to 4″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs.– Drop Ball: 0″ Rise to 7.5″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs.– Raised Ball: 5″ Rise to 3″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs.– Bolt on Pintle Hook: 4″ Rise to 6.5″ Drop | 10-Ton 20,000 lbs.– Channel Style Pintle Hook: 1″ Rise to 6.5″ Drop | 10-Ton 20,000 lbs.

  – Bolt on Pintle & Ball: 4″ Rise to 6.5″ Drop | 8-Ton 16,000 lbs. (2″ Ball is 10,000 lbs).

  – Channel Style Pintle & Ball: 1″ Rise to 6.5″ Drop | SH-334 complete attachment: pintle mode 16,000 lb GTW; 2″ ball mode 12,000 lb GTW; 2-5/16″ ball mode 16,000 lb GTW; 3,000 lb TW in each mode. Proper ball required, including in pintle mode. Lower-rated hitch base or other components limit the setup.

  – Drawbar: 4″ Rise to 4″ Drop | 20,000 lbs.

  – Clevis Mount: 1.5″ Rise to 5.5″ Drop | 20,000 lbs.

  – Sway Bar Mounts: Same Rating as Like Type Mount Listing Above.

• XR Series 8 Hole Hitch Mount Drop & Rise + Rating Guide: (Add 2″ if using 10-Hole Frame)– Combo Ball: 4″ Rise to 4″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs.– Drop Ball: 0″ Rise to 7-1/2″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs.– Raised Ball: 5″ Rise to 3″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs.– Bolt on Pintle Hook: 3.5″ Rise to 8.5″ Drop | 10-Ton 20,000 lbs.– Channel Style Pintle Hook: 1″ Rise to 7″ Drop | 10-Ton 20,000 lbs.

  – Bolt on Pintle & Ball: 3.5″ Rise to 8.5″ Drop | 8-Ton 16,000 lbs. (2″ Ball is 10,000 lbs).

  – Channel Style Pintle & Ball: 1″ Rise to 7″ Drop | SH-334 complete attachment: pintle mode 16,000 lb GTW; 2″ ball mode 12,000 lb GTW; 2-5/16″ ball mode 16,000 lb GTW; 3,000 lb TW in each mode. Proper ball required, including in pintle mode. Lower-rated hitch base or other components limit the setup.

  – Drawbar: 4″ Rise to 4″ Drop | 20,000 lbs.

  – Clevis Mount: 1-1/2″ Rise to 6-1/2″ Drop | 20,000 lbs.

  – Sway Bar Mounts: Same Rating as Like Type Mount Listing Above

• Safety Notice: Towing capacity is limited by the lowest-rated component. Never exceed the lowest applicable gross trailer weight (GTW) or tongue-weight (TW) rating of the vehicle, receiver, hitch base, attachment, ball, coupler or trailer. Evaluate GTW and TW separately. The proper ball must be installed before towing, including in pintle mode. SH-334 without a ball is a replacement part only.

This is a used like new ball mount attachment that was returned to the factory for whatever reason. It may have dings and nicks in the finish. Otherwise, it is like a “almost new” mount & will work great on a shocker bumper hitch.

Choose the best Shocker ball mount attachment that meets your truck and trailer needs. These Shocker Hitch ball mounts are designed to work with all Shocker Air Receiver Hitches, Shocker HD Air hitches, Shocker Impact & Impact Max cushion hitches, and the Shocker XR series hitches. They are built to fit into a 3-1/2″ vertical channel with a 3″ on center bolt pattern like the Shocker bumper mount receiver hitches.  Each mount offers a unique design to best fit your towing needs. Drop and rise lengths will vary depending on hitch style (see drop/rise chart below).

The Shocker combo ball mount was designed to fit everyone’s needs with a 2″ & 2-5/16″ dual ball and optional sway tabs. For higher trailer tongues or lower than stock trucks we have the raised ball mount. For lifted trucks or lower trailer tongues, you can go with the drop ball mount giving up to 8-1/2″ of drop. For stock ride height trucks we have the standard adjustable ball mount or combo ball mount. Each ball mount is offered with either a 2″ or 2-5/16″ trailer ball. If your trailer has sway issues, you can add welded sway tabs to any of our ball mount attachments. These sway tabs work with friction sway arms such as the Shocker 1001 sway bar kit.

For farm applications or military-style hitches, we have several different mounts available. Designed for military-style hitches, contractor trailers, and off-road trailers we have the adjustable pintle hook.  This pintle hook fits 6″ OD x 3″ ID pintle rings and offers additional rise or drop when flipped. Designed for anhydrous tanks and farm wagons we have the drawbar or quad cushioned drawbar mount. These drawbar mounts have a 1″ hole (NOT for use with a hitch ball). For farm equipment, cultivators, fertilizer spreaders, ect. we have the clevis pin mount. This mount has 1-1/4″ holes for farm applications.

Improve your towing game with Shocker Hitch today! Made in the USA by Shocker Hitch®

California Resident: Prop 65 Warning