• This is a refurbished or slightly used like new hitch that was returned to factory for whatever reason. It may have nicks and dings in finish. Otherwise it is a almost a brand new hitch & works great.
• Smoother Safer Towing: Air ride towing technology with a 20K built air bag to cushion the ride & absorb the road shock.
• Built in Air Ride System: Absorbs the bumps, bags, tugs & jerks when towing and creates safer, smoother towing.
• 8 Adjustment Holes. (See drop and rise chart)
• Choose Available Mount.
• Available for 2″, 2 1/2″ and 3″ receiver hitch tubes with Two hitch pin holes for length adjustability
• 20,000 lb rated towing capacity & 2,000 lb tongue wt
• Fine tune for your towing weight. Just add air for heavier loads.
• Huge selection of ball mount adapters available from Pintle hooks, draw bars, drawbar, clevis, drop ball mounts, raise ball mounts and more.
• HD Air Ride Receiver Hitch Kit includes complete Shocker HD receiver hitch base frame assembly with built in 20K air bag, mount attachment selected & and two d-handle hitch pins.
• Air Ride Receiver Hitch Mount Drop & Rise + Tow Rating Guide (8 Hole Frame) 
  – Combo Ball: 0″ Rise to 4.5″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs.
  – Drop Ball: 4.5″ to 8.5″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs.
  – Raised Ball: 2″ Rise to 2″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs.
  – Bolt on Pintle Hook: 2.5″ Rise to 6.5″ Drop | 10-Ton 20,000 lbs.
  – Channel Style Pintle Hook: 3″ to 7″ Drop | 10-Ton 20,000 lbs.
  – Bolt on Pintle & Ball: 2.5″ Rise to 6.5″ Drop | 8-Ton 16,000 lbs. (2″ Ball is 10,000 lbs).
  – Channel Style Pintle & Ball: 3″ to 7″ Drop | SH-334 complete attachment: pintle mode 16,000 lb GTW; 2″ ball mode 12,000 lb GTW; 2-5/16″ ball mode 16,000 lb GTW; 3,000 lb TW in each mode. Proper ball required, including in pintle mode. Lower-rated hitch base or other components limit the setup.
  – Drawbar: 0″ Rise to 4.5″ Drop | 20,000 lbs.
  – Clevis Mount: 3.5″ Drop to 7.5″ Drop | 20,000 lbs.
  – Sway Bar Mounts: Same Rating as Like Type Mount Listing Above.
• What Size Receiver Hitch Do I Need? Not sure if you have a 2″, 2.5″ or 3″ receiver tube?  Measure inside to inside. Check out our guide on How to measure receiver hitch tube size.
• How Much Drop or Rise Do I Need? Check out our guide to find out  how much drop or rise you need.
• Safety Notice: Towing capacity is limited by the lowest-rated component. Never exceed the lowest applicable gross trailer weight (GTW) or tongue-weight (TW) rating of the vehicle, receiver, hitch base, attachment, ball, coupler or trailer. Evaluate GTW and TW separately. The proper ball must be installed before towing, including in pintle mode. SH-334 without a ball is a replacement part only.

This is a refurbished OR slightly used like new hitch that was returned to factory for whatever reason. It may have nicks and dents in finish. Otherwise it is a almost new hitch & works great.

Get smoother towing every mile with the Shocker 20K HD Air Receiver Hitch. Build your own by selecting your receiver hitch size and the adjustable ball mount that suits your towing needs. Choose the air ride receiver hitch base frame with or without a ball mount attachment.

The built-in heavy-duty air spring absorbs road shock and cushions your ride, filtering the bumps, bangs, jerks, tugs, and sways normally experienced with a hard hitch connection. This miniature air suspension system sits between your truck and trailer, making towing easier on you, your passengers, animals, tow vehicle, trailer, cargo, and equipment. It helps reduce damage, wear, and tear on your pickup and trailer.

Fine-tune the air pressure for your trailer’s weight to get the best ride and load control. The HD air ride system sits under the receiver tube, with 10½ inches between the receiver hitch pin and ball center.

The HD features a premium-grade, impact-resistant textured safety red finish, 8 adjustment holes, a 20,000 lbs gross trailer weight capacity, and a 2,000 lbs tongue weight capacity.

Choose from 20+ Shocker receiver hitch ball mount attachments, including combo ball, drop mount, raised mount, sway bar mounting tab options, clevis pin, drawbar, pintle hook, pintle with ball and more.

Installation is simple: slide the hitch into a standard receiver tube. Designed for pickup trucks, vans, and select SUVs with the receiver tube mounted underneath the bumper.

Manufactured by Shocker Hitch® USA in Jamestown, ND.

California Residents: Prop 65 Warning