• Patent-Pending Design: Easily adjust your air pressure with the push of a button. The system simply mounts in your license plate mounting holes.
• Great for All Shocker Air Hitches: Great for Shocker air receiver hitches, gooseneck air hitch & couplers, air tongue mounts, and air equalizers.
• Wireless Hand-Held Remote: Allows you to fine-tune your Shocker Air Hitch at the push of a button for the best ride and load control. Remote with screen that indicates any leaks, along with 2 preset air psi settings and one-touch inflate or deflate.
• 2 Preset Air Pressure Settings & Leak Detection: Remote features a screen to set two preset air pressure settings and will indicate if you have a leak. Will keep your air hitch aired to whatever setting you save.
• Simple 12-Volt Wiring to Battery: Includes 20′ of wiring. Use the required 10-amp main fuse; optional ignition connection requires a 10-amp-or-smaller protected circuit.
• WirelessONE Single-Path Controller: One controlled air circuit; controller 72719-W and manifold 72718-W. Inflate or deflate with the push of a button.
• Heavy-Duty Compressor: Quickly inflates or deflates your air ride hitch.
• 5 Air Lines with Locking Chuck Options: Choose a 2′ line for air bumpers, a 5’ or 10′ air line for a gooseneck trailer, or a 24′ line for airing your tires.
• 2 Air Fittings on Left & Right Side of Box: Use either side for your air hitch, and the other side can be used for an extra air line should you want to air your tires or anything else needing air pressure.
• License Plate Mounting Box: Includes a box with two air fittings, one on the left and one on the right, for easy installation into factory license plate mounting holes. Can also be mounted to the gooseneck trailer tongue.
• Automatic Air Pressure Kit Includes: WirelessONE Single-Path Controller, wiring harness, heavy-duty air compressor, wireless handheld remote, license plate mount box, and 4 screws to attach to license plate holes. Choose a 2′, 5′, 10′ or 24′ screw-on air line with a lock-on air chuck to easily attach to the air hitch air tank valve. Simple to use and simple to install.

Easily adjust the air pressure for your Shocker Air Hitch with the press of a button. The patent-pending auto air compressor kit is great for any Shocker air ride hitch, including Shocker air receiver hitches, gooseneck air hitch with couplers, air tongue mounts, and air equalizers. Simply mount by removing your rear license plate, attaching the air compressor box kit over the license plate screw holes, attaching your plate over the top, screw into place with the provided longer screws, wiring it to your battery, syncing the remote, and attaching the air line to the air hitch.

That’s it, and you are ready to adjust the air of your hitch from the comfort of your cab with the handy remote. This 12-volt system includes the Air Lift WirelessONE single-path controller & wiring harness with 20′ of wiring, a heavy-duty air compressor that can inflate or deflate your air spring bag with the push of a button, a wireless handheld remote with a screen that indicates any leaks, along with 2 pre-set air psi settings and one-touch inflate or deflate, a license plate mount box, and 4 screws to attach the license plate over the top into your factory mounting holes. Choose 2′, 5′, 10′ or 24′ screw-on air line with lock-on air chuck to easily attach to the air hitch air tank valve. Simple to use and simple to install.  Allows you to fine-tune your Shocker Air Hitch at the push of a button for the best ride and load control.

SH-6000 controller and electrical requirements: WirelessONE controller 72719-W and manifold 72718-W operate one controlled air circuit. The two outlet fittings do not provide independently controlled air paths. Use the supplied, required 10-amp main fuse. The optional ignition connection must be on a 10-amp-or-smaller protected circuit. Follow the SH-6000 installation guide and WirelessONE wiring/pairing instructions.